Prakash Engitech Private Limited
Metoda, Rajkot, Gujarat
GST No. 24AAFCP7961F1ZA
TrustSEAL Verified
Call 0804603929783% Response Rate
SEND EMAIL
Product Details:
| Machine Type | Semi-Automatic |
| Power Consumption | 1.1 KW |
| Material | Mild Steel |
| Automatic Grade | Automatic |
| Max Spindle Speed (rpm) | 1560 |
| Brand | Prakash |
| Drilling in M.S. | 40 |
| Spindle Autofeed Ranges | 0.05 & 0.09 (mm/rev.) |
| Machine Measurement | 850 x 650 x 1850 mm |
| Diameter of Column | 160 mm |
| Drill Head Motor | 1.5 HP/960 RPM |
| Maximum Distance from Spindle Nose to Base | 920 mm |
| Column Diameter | 130 mm |
| Spindle Center to column | 345 mm |
| Table Size | 450 x 455 mm |
| Model No | P40AA-Neo |
| Drilling in CI | 45 |
| Tapping in MS | 25 |
| Rough Boring in MS | 75 |
| Spindle Hole Taper | MT-4 |
| Spindle Travel | 250 mm |
| Spindle Speeds | 70-1225 x 9 (RPM x Step) |
| Diameter of RAM | 78 mm |
We are offering Auto feed Column Drilling Machine to our clients.
Oil Bath Gear Box:
The all-new design of gearbox in a given model: R40AA, R40G, and P40AA are having 9 speed with all 9 gear made up of hardened NiCr steel up to HRC 50-55. Oil bath gearbox and hardened gear give very long life to the machine. Rotation and easy sliding of gears in very high reliability. Gears are internally six splined and shafts are extremely splined. All the gear in gear box are machined on imported WMW Germany make gear shaper. All the splines in the gear box are machined on imported PFAUTER Germany make spline milling machine.
Autofeed Gear Box:
Autofeed gear box used in Machine R40AA, R40BA & P40AA is having gear made up of NiCr steel having 2.5 module. All gears are also hardened. Two worm gears are made up of heavy duty 2.82 module teeth. All the shaft in the gear box are supported through the good quality bearing and not the bushes. Engaging of Autofeed through taper cone mechanism as in the lathe machines enables maximum loading capacity leaving behind other machine.
Product Details:
| Drilling Diameter (in mm) | 6 mm |
| Type of Drilling Machine | Pillar |
| No Load Speed | 0-500 rpm |
| Brand | Prakash |
| Drill Depth(mm) | 10-20 mm |
| Spindle Hole Taper | MT -4 |
| Drilling in MS | 40 mm |
| Drilling in CI | 45 mm |
| Tapping in MS | 25 mm |
| Rough Boring in MS | 75 mm |
| Spindle Travel | 250 mm |
| Spindle Speeds | 70-1225 x 9 (RPM X steps) |
| Diameter of RAM | 78 mm |
| Autofeed Ranges | 0.05 & 0.09 (mm/rev.) |
| Max Dist Spindle nose to Table | 575 mm |
| Spindle center to column | 345 mm |
| Machine Mesurement | 1510x850x2100 (LxBxH) |
| Diameter of Column | 130 mm |
| Dist from Spindle Nose to Base | 920 mm |
| Work Table | 450 x 455 mm |
| Drill Head Motor | 1.5 HP/960 RPM |
| Automation Grade | Automatic |
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Prakash |
| Model | P38 |
| Power Voltage | 220 V |
| Maximum Distance Spindle Nose to Table | 610 mm |
| Spindle Center to Column | 321 mm |
| Table Size | 425 x 425 mm |
| Machine Measurement | 700 x 450 x 1830 mm |
| Column Diameter | 110 mm |
| Distance from Spindle Nose to Base | 970 mm |
| Drill Head Motor | 1.5 HP |
| V belt | B-60 |
| Drilling Capacity in MS | 38 mm |
| Drilling Capacity in CI | 42 mm |
| Tapping in MS | 20 mm |
| Spindle Hole Taper | MT-4 |
| Spindle Travel | 250 mm |
| Spindle Speed | 80-2600 x 8 (rpm x step) |
| Diameter of RAM | 78 mm |
| Feed Type | Fine Feed |
Extra Accessories:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Prakash |
| Model | P20/P20T |
| Spindle Hole Taper | MT-2 |
| Power Voltage | 220 V |
| Distance from Spindle Nose to Base | 905 mm |
| Tapping in MS | 20 mm |
| Drilling Capacity in MS | 20 mm |
| Drilling Capacity in CI | 22 mm |
| Spindle Travel | 125 mm |
| Spindle Speed | 50-3000 x 8 (rpm x step) |
| Diameter of RAM | 55 mm |
| Maximum Distance Spindle Nose to Table | 605 mm |
| Spindle Center to Column | 206 mm |
| Table Size | 260 x 260 mm |
| Machine Measurement | 480 x 330 x 1300 mm |
| Column Diameter | 75 mm |
We are offering Pillar Drill Machine to our clients.
Standard Accessories:
Extra Accessories:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Prakash |
| Model | P35 |
| Drill Head Motor | 1.5 HP |
| Drilling Capacity in C.I | 38 mm |
| Machine Measurement | 690 x 470 x 1778 mm |
| Spindle Hole Taper | MT-4 |
| Spindle Travel | 160 mm |
| Spindle Speed | 80-2600 x 8 (rpm x step) |
| Diameter of RAM | 72 mm |
| Feed Type | Fine Feed |
| Maximum Distance Spindle Nose to Table | 670 mm |
| Spindle Center to Column | 260 mm |
| Table Size | 355 x 355 mm |
| Column Diameter | 108 mm |
| Distance from Spindle Nose to Base | 1120 mm |
| V belt | B-54 |
| Tapping in MS | 20 mm |
| Drilling Capacity in M.S | 35 mm |
We are successfully meeting the requirements of our clients by offering the best quality range of Geared Pillar Drill Machine.
Standard Accessories:
Extra Accessories:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | Prakash |
| Model | P25 |
| Spindle Travel | 160 mm |
| Spindle Hole Taper | MT-3 |
| Drill Head Motor | 1.5 HP/960 RPM |
| Column Diameter | 90 mm |
| Distance from Spindle Nose to Base | 950 mm |
| V belt | B-46 |
| Drilling Capacity in MS | 25 mm |
| Drilling Capacity in CI | 32 mm |
| Tapping in MS | 20 mm |
| Spindle Speed | 100-2650 x 8 (rpm x step) |
| Diameter of RAM | 72 mm |
| Feed Type | Fine Feed |
| Maximum Distance Spindle Nose to Table | 560 mm |
| Spindle Center to Column | 206 mm |
| Table Size | 318 x 318 mm |
| Machine Measurement | 500 x 304 x 1600 mm |
| Automation Grade | Automatic |
Standard Accessories:
Extra Accessories:
Product Details:
| Minimum Order Quantity | 1 Unit |
| Brand | PRAKASH |
| Type | Vertical Column Drill Machine |
| Model Name/Number | PRAKASH P40AA |
| Drill Type | Column Drill Machine |
| Usage/Application | Heavy Jobs High Production |
| Material | Mild Steel |
| Drilling Diameter | 40 mm |
| Warranty | 1 year |
Additional Information:
Product Details:
| Model | P25 |
| Brand | Prakash |
| Spindle Hole Taper | MT-3 |
| Drill Head Motor | 1 HP |
| Column Diameter | 90 mm |
| Distance from Spindle Nose to Base | 950 mm |
| V belt | B-46 |
| Spindle Travel | 160 mm |
| Drilling Capacity in MS | 25 mm |
| Drilling Capacity in CI | 32 mm |
| Tapping in MS | 20 mm |
| Spindle Speed | 100-2650 x 8 (rpm x step) |
| Diameter of RAM | 72 mm |
| Feed Type | Fine Feed |
| Maximum Distance Spindle Nose to Table | 560 mm |
| Spindle Center to Column | 206 mm |
| Table Size | 318 x 318 mm |
| Machine Measurement | 500 x 304 x 1600 mm |
| Automation Grade | Automatic |
We are offering Automatic Fine Feed Pillar Drill Machine to our clients.
Standard Accessories:
Extra Accessories:
Product Details:
| Type of Drilling Machine | Pillar |
| Spindle Travel | 250mm |
| Model Name/Number | P40aa |
| Brand | Prakash |
| Material | MS |
| Usage | High Production |