Our All geared Auto feed Pillar Drill Machines (P40AA) are the new version of 40mm All geared Auto feed Pillar Drill Machine. Available with a gearbox of 9 speed with all 9 gears of NiCr Steel, hardened up to 50 HRC, these machines have precision parts made of EN-8 steel. The diameter of RAM is 78 mm and the machine measurement is of 880 x 675 x 1850mm that renders an auto feed range of 0.05 & 0.09 mm per revolution.

Features:

• Rigid machine structure offers vibration free machining
• All the gears are supported through good quality bearings instead of bushes
• Oil bath gear box and hardened gears give very long life to the machines
• Autofeed gears are also hardened
• For extra rigidity & stability machine base is reinforced by ribs
• Octagonal shape Pillar bracket acts like rib providing more rigidity
• Available with six spline and supported through taper roller bearings to withstand thrust load
• Drive to the spindle is through six splined sleeve inside
• The RAM is made from special alloy steel pipe of more thickness
• Precision parts are made of EN-8 steel
• Complete electrical panel board with push button switches
• Available with limit switch for travel adjustment and 1 No. "ISI" electrical motor
• Rotation and easy sliding gears in bearings renders high reliability
• Steel RAM of 78mm diameter
• Pinion with 9 DP heavy duty teeth enables greater loading capacity
• Square table with molded closed "T" slots
• Vertical face with 'T' slot offers working area and manages coolant application
• Especially designed for fast metal removal rate of lowest cost • Reduced maintenance cost
• Simple yet sophisticated
• Easily & readily available spare parts

Please see the attached file for More detailed information and technical specifications.

We are a trusted name in offering Backgeared Auto feed Pillar Drill Machine (P40BA) that carries drilling capacity in M.S and C.I. of 40 and 45 mm respectively. The diameter of RAM is 78 mm and is made from special alloy steel pipe of more thickness. All the precision parts are made of EN-8 steel and the motors bear capacity of 2 hp.

Features:

• Available with six spline and supported through taper roller bearings to withstand thrust load
• Rigid machine structure
• Offers vibration free machining
• All the gears are supported through good quality bearings instead of bushes
• Gears made up of 30 Grade Cast Iron with more ductility gives long life against wear out.
• Auto feed gears are also hardened
• Reduced maintenance cost
• Simple yet sophisticated
• Easily & readily available spare parts
• For extra rigidity & stability machine base is reinforced by ribs
• Octagonal shape Pillar bracket acts like rib providing more rigidity
•  Drive to the spindle is through six splined sleeve inside
• The RAM is made from special alloy steel pipe of more thickness
• Precision parts are made of EN-8 steel
• Especially designed for fast metal removal rate of lowest cost

Please see the attached file for more detailed information and technical specifications.

Over the years we have been catering to the requirements of our clients manufacturing and exporting a quality 38 mm Pillar Drill Machine (P38). These offer drilling capacity of 38 mm in M.S. and 42 mm in C.I. Available in customized form, these machines bear maximum distance of 760 mm from spindle nose to table.

Features:

• Rigid machine structure
• Easily & readily available spare parts
• Offers vibration free machining
• Reduced maintenance cost
• Spindle having six spline and supported through taper roller bearings to withstand thrust load
• Simple yet sophisticated
• The RAM is made from special alloy steel pipe of more thickness
• Precision parts are made of EN-8 steel
• Especially designed for fast metal removal rate of lowest cost • For extra rigidity & stability machine base is reinforced by ribs
• Octagonal shape Pillar bracket acts like rib providing more rigidity
• Drive to the spindle is through six splined sleeve inside.

Please see the attached file for more detailed information and technical specifications

We offer Pillar Drill Machine of P35, P25 models. These are high in performance and are engineered to perfection. The machine measurement of P35 and P25 are 690 x 470 x 1778mm and 500 x 304 x 1600 mm respectively. These are highly efficient in drilling, tapping and boring in M.S. and C.I. and bears a steel RAM of 72mm diameter along with a pinion with 10 DP heavy duty teeth for greater loading capacity.

Features:

• Precision parts are made of EN-8 steel
• Especially designed for fast metal removal rate of lowest cost • Low maintenance
• Simple yet sophisticated
• Rigid machine structure for vibration free machining
• Machine base is reinforced by ribs, for extra rigidity & stability
• Pillar bracket is made in octagonal shape which acts like rib giving more rigidity
• Spindle all the machines have six spline and supported through taper roller bearings to withstand thrust load
• Drive to the spindle is through six splined sleeve inside in all machines.
• The RAM is made from special alloy steel pipe of more thickness
• Easily & readily available spare parts
• Square table with molded closed "T" slots and also with vertical face with 'T' slot offers managed coolant application

Please see attached file for more detailed information and technical specifications.

The 20 mm Pillar Drill Machine (P20) manufactured and exported by us are widely used in different industries worldwide. These bear motors of 0.5 HP capacity and a column diameter of 75 mm. Efficient in drilling In M.S. and C.I. of 20 mm and 22 mm capacity respectively, these machines are of 480 x 330 x 1300 mm size and can also be customized adhering to the designs and specifications of our esteemed clients.

Features:

• Machine base is reinforced by ribs, for extra rigidity & stability
• Pillar bracket is made in octagonal shape which acts like rib giving more rigidity
• Spindle in all the machines have six spline and supported through taper roller bearings to withstand thrust load
• Drive to the spindle is through six splined sleeve inside in all machines
• Rigid machine structure for vibration free machining
• The RAM is made from special alloy steel pipe of more thickness.
• Easily & readily available spare parts
• Precision parts are made of EN-8 steel
• Especially designed for fast metal removal rate of lowest cost • Low maintenance
• Simple yet sophisticated
• Square table with molded closed "T" slots and also with vertical face with 'T' slot offers managed coolant application
• All the gears in the pillar drill machine are supported through good quality bearings

Please see attached file for more detailed information and technical specifications.